interfaces.c

Go to the documentation of this file.

// SPDX-License-Identifier: GPL-2.0-or-later
 
/***************************************************************************
 *   Copyright (C) 2005 by Dominic Rath                                    *
 *   Dominic.Rath@gmx.de                                                   *
 *                                                                         *
 *   Copyright (C) 2007,2008 Øyvind Harboe                                 *
 *   oyvind.harboe@zylin.com                                               *
 *                                                                         *
 *   Copyright (C) 2009 SoftPLC Corporation                                *
 *       http://softplc.com                                                *
 *   dick@softplc.com                                                      *
 *                                                                         *
 *   Copyright (C) 2009 Zachary T Welch                                    *
 *   zw@superlucidity.net                                                  *
 *                                                                         *
 *   Copyright (C) 2020, Ampere Computing LLC                              *
 ***************************************************************************/
 
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
 
#include "interfaces.h"
 
struct adapter_driver *adapter_drivers[] = {
#if BUILD_PARPORT == 1
        &parport_adapter_driver,
#endif
#if BUILD_DUMMY == 1
        &dummy_adapter_driver,
#endif
#if BUILD_FTDI == 1
        &ftdi_adapter_driver,
#endif
#if BUILD_USB_BLASTER || BUILD_USB_BLASTER_2 == 1
        &usb_blaster_adapter_driver,
#endif
#if BUILD_ESP_USB_JTAG == 1
        &esp_usb_adapter_driver,
#endif
#if BUILD_JTAG_VPI == 1
        &jtag_vpi_adapter_driver,
#endif
#if BUILD_VDEBUG == 1
        &vdebug_adapter_driver,
#endif
#if BUILD_JTAG_DPI == 1
        &jtag_dpi_adapter_driver,
#endif
#if BUILD_FT232R == 1
        &ft232r_adapter_driver,
#endif
#if BUILD_AMTJTAGACCEL == 1
        &amt_jtagaccel_adapter_driver,
#endif
#if BUILD_EP93XX == 1
        &ep93xx_adapter_driver,
#endif
#if BUILD_AT91RM9200 == 1
        &at91rm9200_adapter_driver,
#endif
#if BUILD_GW16012 == 1
        &gw16012_adapter_driver,
#endif
#if BUILD_PRESTO
        &presto_adapter_driver,
#endif
#if BUILD_USBPROG == 1
        &usbprog_adapter_driver,
#endif
#if BUILD_OPENJTAG == 1
        &openjtag_adapter_driver,
#endif
#if BUILD_JLINK == 1
        &jlink_adapter_driver,
#endif
#if BUILD_VSLLINK == 1
        &vsllink_adapter_driver,
#endif
#if BUILD_RLINK == 1
        &rlink_adapter_driver,
#endif
#if BUILD_ULINK == 1
        &ulink_adapter_driver,
#endif
#if BUILD_ANGIE == 1
        &angie_adapter_driver,
#endif
#if BUILD_ARMJTAGEW == 1
        &armjtagew_adapter_driver,
#endif
#if BUILD_BUS_PIRATE == 1
        &buspirate_adapter_driver,
#endif
#if BUILD_REMOTE_BITBANG == 1
        &remote_bitbang_adapter_driver,
#endif
#if BUILD_HLADAPTER == 1
        &hl_adapter_driver,
#endif
#if BUILD_OSBDM == 1
        &osbdm_adapter_driver,
#endif
#if BUILD_OPENDOUS == 1
        &opendous_adapter_driver,
#endif
#if BUILD_SYSFSGPIO == 1
        &sysfsgpio_adapter_driver,
#endif
#if BUILD_LINUXGPIOD == 1
        &linuxgpiod_adapter_driver,
#endif
#if BUILD_XLNX_PCIE_XVC == 1
        &xlnx_pcie_xvc_adapter_driver,
#endif
#if BUILD_BCM2835GPIO == 1
        &bcm2835gpio_adapter_driver,
#endif
#if BUILD_CMSIS_DAP_USB == 1 || BUILD_CMSIS_DAP_HID == 1
        &cmsis_dap_adapter_driver,
#endif
#if BUILD_KITPROG == 1
        &kitprog_adapter_driver,
#endif
#if BUILD_IMX_GPIO == 1
        &imx_gpio_adapter_driver,
#endif
#if BUILD_XDS110 == 1
        &xds110_adapter_driver,
#endif
#if BUILD_HLADAPTER_STLINK == 1
        &stlink_dap_adapter_driver,
#endif
#if BUILD_RSHIM == 1
        &rshim_dap_adapter_driver,
#endif
#if BUILD_DMEM == 1
        &dmem_dap_adapter_driver,
#endif
#if BUILD_AM335XGPIO == 1
        &am335xgpio_adapter_driver,
#endif
        NULL,
    };