Include dependency graph for interface.c:

Data Structures
struct	name_mapping

struct	tms_sequences

Macros
#define	B8(bits, count) {((uint8_t)B8__(HEX__(bits))), (count)}

#define	B8__(x)

#define	HEX__(n) 0x##n##LU

#define	JTAG_DEBUG_STATE_APPEND(buf, len, bit) do { buf[len] = bit ? '1' : '0'; } while (0)

#define	JTAG_DEBUG_STATE_PRINT(a, b, astr, bstr)

Typedefs
typedef const struct tms_sequences	tms_table[6][6]

Functions
tap_state_t	jtag_debug_state_machine_ (const void tms_buf, const void tdi_buf, unsigned int tap_bits, tap_state_t next_state)

tap_state_t	tap_get_end_state (void)
	For more information,. More...

tap_state_t	tap_get_state (void)
	This function gets the state of the "state follower" which tracks the state of the TAPs connected to the cable. More...

int	tap_get_tms_path (tap_state_t from, tap_state_t to)
	This function provides a "bit sequence" indicating what has to be done with TMS during a sequence of seven TAP clock cycles in order to get from state "from" to state "to". More...

int	tap_get_tms_path_len (tap_state_t from, tap_state_t to)
	Function int tap_get_tms_path_len returns the total number of bits that represents a TMS path transition as given by the function tap_get_tms_path(). More...

bool	tap_is_state_stable (tap_state_t astate)
	Function tap_is_state_stable returns true if the astate is stable. More...

int	tap_move_ndx (tap_state_t astate)
	Function tap_move_ndx when given a stable state, returns an index from 0-5. More...

void	tap_set_end_state (tap_state_t new_end_state)
	This function sets the state of an "end state follower" which tracks the state that any cable driver thinks will be the end (resultant) state of the current TAP SIR or SDR operation. More...

void	tap_set_state_impl (tap_state_t new_state)
	implementation of wrapper function tap_set_state() More...

tap_state_t	tap_state_by_name (const char *name)
	Provides user-friendly name lookup of TAP states. More...

const char *	tap_state_name (tap_state_t state)
	Function tap_state_name Returns a string suitable for display representing the JTAG tap_state. More...

tap_state_t	tap_state_transition (tap_state_t cur_state, bool tms)
	Function tap_state_transition takes a current TAP state and returns the next state according to the tms value. More...

void	tap_use_new_tms_table (bool use_new)
	Allow switching between old and new TMS tables. More...

bool	tap_uses_new_tms_table (void)

Variables
static tap_state_t	end_state_follower = TAP_RESET

static const struct tms_sequences	old_tms_seqs [6][6]

static const struct tms_sequences	short_tms_seqs [6][6]

static tap_state_t	state_follower = TAP_RESET

static const struct name_mapping	tap_name_mapping []

static tms_table *	tms_seqs = &short_tms_seqs

Macro Definition Documentation

◆ B8

#define B8	(	bits,
		count
	)	{((uint8_t)B8__(HEX__(bits))), (count)}

Definition at line 123 of file interface.c.

◆ B8__

#define B8__ ( x )

Value:

    ((((x) & 0x0000000FLU) ? (1 << 0) : 0) \
    +(((x) & 0x000000F0LU) ? (1 << 1) : 0) \
    +(((x) & 0x00000F00LU) ? (1 << 2) : 0) \
    +(((x) & 0x0000F000LU) ? (1 << 3) : 0) \
    +(((x) & 0x000F0000LU) ? (1 << 4) : 0) \
    +(((x) & 0x00F00000LU) ? (1 << 5) : 0) \
    +(((x) & 0x0F000000LU) ? (1 << 6) : 0) \
    +(((x) & 0xF0000000LU) ? (1 << 7) : 0))

Definition at line 113 of file interface.c.

◆ HEX__

#define HEX__ ( n ) 0x##n##LU

Definition at line 111 of file interface.c.

◆ JTAG_DEBUG_STATE_APPEND

#define JTAG_DEBUG_STATE_APPEND	(	buf,
		len,
		bit
	)	do { buf[len] = bit ? '1' : '0'; } while (0)

Definition at line 368 of file interface.c.

◆ JTAG_DEBUG_STATE_PRINT

#define JTAG_DEBUG_STATE_PRINT	(	a,
		b,
		astr,
		bstr
	)

Value:

LOG_DEBUG_IO("TAP/SM: %9s -> %5s\tTMS: %s\tTDI: %s", \

tap_state_name(a), tap_state_name(b), astr, bstr)

tap_state_name

const char * tap_state_name(tap_state_t state)

Function tap_state_name Returns a string suitable for display representing the JTAG tap_state.

Definition: interface.c:344

LOG_DEBUG_IO

#define LOG_DEBUG_IO(expr ...)

Definition: log.h:101

Definition at line 370 of file interface.c.

Typedef Documentation

◆ tms_table

typedef const struct tms_sequences tms_table[6][6]

Definition at line 61 of file interface.c.

Function Documentation

◆ jtag_debug_state_machine_()

tap_state_t jtag_debug_state_machine_	(	const void *	tms_buf,
		const void *	tdi_buf,
		unsigned int	tap_bits,
		tap_state_t	next_state
	)

Definition at line 374 of file interface.c.

References DIV_ROUND_UP, JTAG_DEBUG_STATE_APPEND, JTAG_DEBUG_STATE_PRINT, LOG_DEBUG_IO, tap_state_name(), tap_state_transition(), tdi_buffer, and tms_buffer.

Referenced by jtag_debug_state_machine().

◆ tap_get_end_state()

tap_state_t tap_get_end_state ( void )

For more information,.

See also: tap_set_end_state

Returns: tap_state_t - The state the TAPs should be in at completion of the current TAP operation.

Definition at line 56 of file interface.c.

References end_state_follower.

Referenced by amt_jtagaccel_runtest(), amt_jtagaccel_scan(), amt_jtagaccel_state_move(), angie_queue_scan(), angie_queue_statemove(), armjtagew_runtest(), armjtagew_scan(), armjtagew_state_move(), bitbang_runtest(), bitbang_scan(), bitbang_state_move(), bitq_execute_queue(), bitq_runtest(), buspirate_runtest(), buspirate_scan(), buspirate_state_move(), cmsis_dap_execute_scan(), cmsis_dap_runtest(), cmsis_dap_state_move(), ftdi_execute_runtest(), ftdi_execute_scan(), ftdi_execute_statemove(), gw16012_runtest(), gw16012_scan(), gw16012_state_move(), jlink_execute_scan(), jlink_runtest(), jlink_state_move(), opendous_runtest(), opendous_scan(), opendous_state_move(), openjtag_execute_runtest(), openjtag_execute_scan(), openjtag_execute_statemove(), osbdm_add_scan(), osbdm_add_statemove(), rlink_runtest(), rlink_scan(), rlink_state_move(), syncbb_runtest(), syncbb_scan(), syncbb_state_move(), ulink_queue_scan(), ulink_queue_statemove(), usbprog_runtest(), usbprog_scan(), usbprog_state_move(), vsllink_runtest(), vsllink_scan(), vsllink_state_move(), xlnx_pcie_xvc_execute_runtest(), xlnx_pcie_xvc_execute_scan(), and xlnx_pcie_xvc_execute_statemove().

◆ tap_get_state()

tap_state_t tap_get_state ( void )

This function gets the state of the "state follower" which tracks the state of the TAPs connected to the cable.

See also: tap_set_state

Returns: tap_state_t The state the TAPs are in now.

Definition at line 37 of file interface.c.

References state_follower.

Referenced by amt_jtagaccel_runtest(), amt_jtagaccel_scan(), amt_jtagaccel_state_move(), angie_queue_pathmove(), angie_queue_runtest(), angie_queue_scan(), angie_queue_stableclocks(), angie_queue_statemove(), armjtagew_path_move(), armjtagew_runtest(), armjtagew_scan(), armjtagew_state_move(), bitbang_path_move(), bitbang_runtest(), bitbang_scan(), bitbang_stableclocks(), bitbang_state_move(), bitq_execute_queue(), bitq_path_move(), bitq_runtest(), bitq_scan_field(), bitq_state_move(), buspirate_path_move(), buspirate_runtest(), buspirate_scan(), buspirate_stableclocks(), buspirate_state_move(), cmsis_dap_execute_scan(), cmsis_dap_pathmove(), cmsis_dap_runtest(), cmsis_dap_stableclocks(), cmsis_dap_state_move(), ftdi_execute_pathmove(), ftdi_execute_runtest(), ftdi_execute_scan(), ftdi_execute_sleep(), ftdi_execute_stableclocks(), ftdi_execute_statemove(), gw16012_path_move(), gw16012_runtest(), gw16012_scan(), gw16012_state_move(), jlink_execute_scan(), jlink_path_move(), jlink_runtest(), jlink_stableclocks(), jlink_state_move(), jtag_vpi_path_move(), jtag_vpi_stableclocks(), jtag_vpi_state_move(), move_to_state(), opendous_path_move(), opendous_runtest(), opendous_scan(), opendous_state_move(), openjtag_execute_runtest(), openjtag_execute_scan(), osbdm_add_pathmove(), osbdm_add_scan(), osbdm_add_stableclocks(), osbdm_add_statemove(), rlink_path_move(), rlink_runtest(), rlink_scan(), rlink_state_move(), syncbb_path_move(), syncbb_runtest(), syncbb_scan(), syncbb_stableclocks(), syncbb_state_move(), ublast_path_move(), ublast_state_move(), ulink_queue_pathmove(), ulink_queue_runtest(), ulink_queue_scan(), ulink_queue_stableclocks(), ulink_queue_statemove(), usbprog_path_move(), usbprog_runtest(), usbprog_scan(), usbprog_state_move(), vdebug_jtag_path_move(), vdebug_jtag_runtest(), vdebug_jtag_scan(), vdebug_jtag_stableclocks(), vdebug_jtag_tlr(), vsllink_execute_queue(), vsllink_path_move(), vsllink_runtest(), vsllink_scan(), vsllink_state_move(), xlnx_pcie_xvc_execute_pathmove(), xlnx_pcie_xvc_execute_runtest(), xlnx_pcie_xvc_execute_scan(), xlnx_pcie_xvc_execute_stableclocks(), and xlnx_pcie_xvc_execute_statemove().

◆ tap_get_tms_path()

int tap_get_tms_path	(	tap_state_t	from,
		tap_state_t	to
	)

This function provides a "bit sequence" indicating what has to be done with TMS during a sequence of seven TAP clock cycles in order to get from state "from" to state "to".

The length of the sequence must be determined with a parallel call to tap_get_tms_path_len().

Parameters

from	The starting state.
to	The desired final state.

Returns: int The required TMS bit sequence, with the first bit in the sequence at bit 0.

Definition at line 190 of file interface.c.

References tap_move_ndx(), and tms_seqs.

Referenced by angie_queue_scan(), angie_queue_statemove(), armjtagew_state_move(), bitbang_state_move(), bitq_state_move(), buspirate_state_move(), cmsis_dap_state_move(), gw16012_state_move(), jlink_state_move(), jtag_add_statemove(), jtag_vpi_state_move(), move_to_state(), opendous_state_move(), osbdm_add_statemove(), rlink_state_move(), syncbb_state_move(), ublast_state_move(), ulink_queue_scan(), ulink_queue_statemove(), usbprog_state_move(), vdebug_jtag_runtest(), vdebug_jtag_scan(), vdebug_jtag_tlr(), vsllink_state_move(), and xlnx_pcie_xvc_execute_statemove().

◆ tap_get_tms_path_len()

int tap_get_tms_path_len	(	tap_state_t	from,
		tap_state_t	to
	)

Function int tap_get_tms_path_len returns the total number of bits that represents a TMS path transition as given by the function tap_get_tms_path().

For at least one interface (JLink) it's not OK to simply "pad" TMS sequences to fit a whole byte. (I suspect this is a general TAP problem within OOCD.) Padding TMS causes all manner of instability that's not easily discovered. Using this routine we can apply EXACTLY the state transitions required to make something work - no more - no less.

Parameters

from	is the starting state
to	is the resultant or final state

Returns: int - the total number of bits in a transition.

Definition at line 195 of file interface.c.

References tap_move_ndx(), and tms_seqs.

Referenced by angie_queue_scan(), angie_queue_statemove(), armjtagew_state_move(), bitbang_state_move(), bitq_state_move(), buspirate_state_move(), cmsis_dap_state_move(), ftdi_initialize(), gw16012_state_move(), jlink_state_move(), jtag_add_statemove(), jtag_vpi_state_move(), move_to_state(), opendous_state_move(), osbdm_add_statemove(), rlink_state_move(), syncbb_state_move(), ublast_state_move(), ulink_queue_scan(), ulink_queue_statemove(), vdebug_jtag_runtest(), vdebug_jtag_scan(), vdebug_jtag_tlr(), vsllink_state_move(), and xlnx_pcie_xvc_execute_statemove().

◆ tap_is_state_stable()

bool tap_is_state_stable ( tap_state_t astate )

Function tap_is_state_stable returns true if the astate is stable.

Definition at line 200 of file interface.c.

References TAP_DRPAUSE, TAP_DRSHIFT, TAP_IDLE, TAP_IRPAUSE, TAP_IRSHIFT, and TAP_RESET.

Referenced by amt_jtagaccel_end_state(), angie_queue_stableclocks(), angie_set_end_state(), armjtagew_end_state(), bitbang_end_state(), bitq_end_state(), bitq_state_move(), buspirate_end_state(), cmsis_dap_end_state(), ftdi_end_state(), gw16012_end_state(), jlink_end_state(), jtag_add_clocks(), jtag_add_pathmove(), jtag_add_statemove(), opendous_end_state(), osbdm_add_stableclocks(), rlink_end_state(), syncbb_end_state(), ulink_queue_stableclocks(), ulink_set_end_state(), usbprog_end_state(), and vsllink_end_state().

◆ tap_move_ndx()

int tap_move_ndx ( tap_state_t astate )

Function tap_move_ndx when given a stable state, returns an index from 0-5.

The index corresponds to a sequence of stable states which are given in this order:

{ TAP_RESET, TAP_IDLE, TAP_DRSHIFT, TAP_DRPAUSE, TAP_IRSHIFT, TAP_IRPAUSE }

This sequence corresponds to look up tables which are used in some of the cable drivers.

Parameters

astate is the stable state to find in the sequence. If a non stable state is passed, this may cause the program to output an error message and terminate.

Returns: int - the array (or sequence) index as described above

Definition at line 61 of file interface.c.

Referenced by amt_jtagaccel_scan(), amt_jtagaccel_state_move(), tap_get_tms_path(), and tap_get_tms_path_len().

◆ tap_set_end_state()

void tap_set_end_state ( tap_state_t new_end_state )

This function sets the state of an "end state follower" which tracks the state that any cable driver thinks will be the end (resultant) state of the current TAP SIR or SDR operation.

At completion of that TAP operation this value is copied into the state follower via tap_set_state().

Parameters

new_end_state The state the TAPs should enter at completion of a pending TAP operation.

Definition at line 48 of file interface.c.

References end_state_follower.

Referenced by amt_jtagaccel_end_state(), angie_queue_runtest(), angie_queue_scan(), angie_set_end_state(), armjtagew_end_state(), armjtagew_path_move(), bitbang_end_state(), bitbang_path_move(), bitq_end_state(), bitq_path_move(), buspirate_end_state(), buspirate_path_move(), cmsis_dap_end_state(), ftdi_end_state(), ftdi_execute_pathmove(), gw16012_end_state(), gw16012_path_move(), jlink_end_state(), jlink_path_move(), opendous_end_state(), opendous_path_move(), openjtag_execute_runtest(), openjtag_execute_scan(), openjtag_execute_statemove(), osbdm_add_pathmove(), osbdm_add_scan(), osbdm_add_statemove(), rlink_end_state(), rlink_path_move(), syncbb_end_state(), syncbb_path_move(), ulink_queue_runtest(), ulink_queue_scan(), ulink_set_end_state(), usbprog_end_state(), usbprog_path_move(), vsllink_end_state(), vsllink_path_move(), xlnx_pcie_xvc_execute_command(), xlnx_pcie_xvc_execute_pathmove(), xlnx_pcie_xvc_execute_runtest(), and xlnx_pcie_xvc_execute_scan().

◆ tap_set_state_impl()

void tap_set_state_impl ( tap_state_t new_state )

implementation of wrapper function tap_set_state()

Definition at line 31 of file interface.c.

References state_follower.

◆ tap_state_by_name()

tap_state_t tap_state_by_name ( const char * name )

Provides user-friendly name lookup of TAP states.

Definition at line 355 of file interface.c.

References ARRAY_SIZE, name, TAP_INVALID, and tap_name_mapping.

Referenced by COMMAND_HANDLER(), and reset_jtag().

◆ tap_state_name()

const char* tap_state_name ( tap_state_t state )

Function tap_state_name Returns a string suitable for display representing the JTAG tap_state.

Definition at line 344 of file interface.c.

References ARRAY_SIZE, name_mapping::name, state, and tap_name_mapping.

Referenced by angie_queue_pathmove(), angie_set_end_state(), armjtagew_path_move(), bitbang_execute_queue(), bitbang_path_move(), bitq_path_move(), buspirate_execute_queue(), buspirate_path_move(), buspirate_runtest(), cmsis_dap_execute_scan(), cmsis_dap_pathmove(), cmsis_dap_state_move(), COMMAND_HANDLER(), default_interface_jtag_execute_queue(), dummy_reset(), dummy_write(), ftdi_end_state(), ftdi_execute_pathmove(), ftdi_execute_runtest(), ftdi_execute_scan(), ftdi_execute_sleep(), ftdi_execute_stableclocks(), ftdi_execute_statemove(), gw16012_path_move(), jlink_execute_scan(), jlink_path_move(), jtag_add_clocks(), jtag_add_pathmove(), jtag_add_statemove(), jtag_debug_state_machine_(), move_to_state(), opendous_path_move(), openjtag_execute_scan(), osbdm_add_pathmove(), osbdm_add_stableclocks(), rlink_path_move(), svf_add_statemove(), syncbb_path_move(), ublast_state_move(), ulink_queue_pathmove(), ulink_set_end_state(), usbprog_path_move(), usbprog_runtest(), vsllink_execute_queue(), vsllink_path_move(), xlnx_pcie_xvc_execute_pathmove(), xlnx_pcie_xvc_execute_scan(), and xlnx_pcie_xvc_execute_statemove().

◆ tap_state_transition()

tap_state_t tap_state_transition	(	tap_state_t	current_state,
		bool	tms
	)

Function tap_state_transition takes a current TAP state and returns the next state according to the tms value.

Parameters

current_state	is the state of a TAP currently.
tms	is either zero or non-zero, just like a real TMS line in a jtag interface.

Returns: tap_state_t - the next state a TAP would enter.

Definition at line 223 of file interface.c.

References LOG_ERROR, TAP_DRCAPTURE, TAP_DREXIT1, TAP_DREXIT2, TAP_DRPAUSE, TAP_DRSELECT, TAP_DRSHIFT, TAP_DRUPDATE, TAP_IDLE, TAP_IRCAPTURE, TAP_IREXIT1, TAP_IREXIT2, TAP_IRPAUSE, TAP_IRSELECT, TAP_IRSHIFT, TAP_IRUPDATE, and TAP_RESET.

Referenced by angie_queue_pathmove(), armjtagew_path_move(), bitbang_path_move(), bitq_path_move(), buspirate_path_move(), cmsis_dap_execute_scan(), cmsis_dap_pathmove(), dummy_write(), ftdi_execute_pathmove(), ftdi_execute_scan(), gw16012_path_move(), jlink_execute_scan(), jlink_path_move(), jtag_add_pathmove(), jtag_add_statemove(), jtag_debug_state_machine_(), jtag_vpi_path_move(), move_to_state(), opendous_path_move(), osbdm_add_pathmove(), rlink_path_move(), syncbb_path_move(), ublast_path_move(), ulink_queue_pathmove(), usbprog_path_move(), vdebug_jtag_path_move(), vsllink_path_move(), and xlnx_pcie_xvc_execute_pathmove().

◆ tap_use_new_tms_table()

void tap_use_new_tms_table ( bool use_new )

Allow switching between old and new TMS tables.

See also: tap_get_tms_path

Definition at line 447 of file interface.c.

References old_tms_seqs, short_tms_seqs, and tms_seqs.

Referenced by COMMAND_HANDLER().

◆ tap_uses_new_tms_table()

bool tap_uses_new_tms_table ( void )

Returns: True if new TMS table is active; false otherwise.

Definition at line 451 of file interface.c.

References short_tms_seqs, and tms_seqs.

Referenced by COMMAND_HANDLER().

Variable Documentation

◆ end_state_follower

tap_state_t end_state_follower = TAP_RESET

static

See also: tap_set_end_state() and tap_get_end_state() accessors. Actual name is not important because accessors hide it.

Definition at line 46 of file interface.c.

Referenced by tap_get_end_state(), and tap_set_end_state().

◆ old_tms_seqs

const struct tms_sequences old_tms_seqs[6][6]

static

Initial value:

= { 
    
 
 
    
{B8(1111111, 7), B8(0000000, 7), B8(0010111, 7), B8(0001010, 7), B8(0011011, 7), B8(0010110, 7)},
{B8(1111111, 7), B8(0000000, 7), B8(0100101, 7), B8(0000101, 7), B8(0101011, 7), B8(0001011, 7)},
{B8(1111111, 7), B8(0110001, 7), B8(0000000, 7), B8(0000001, 7), B8(0001111, 7), B8(0101111, 7)},
{B8(1111111, 7), B8(0110000, 7), B8(0100000, 7), B8(0010111, 7), B8(0011110, 7), B8(0101111, 7)},
{B8(1111111, 7), B8(0110001, 7), B8(0000111, 7), B8(0010111, 7), B8(0000000, 7), B8(0000001, 7)},
{B8(1111111, 7), B8(0110000, 7), B8(0011100, 7), B8(0010111, 7), B8(0011110, 7), B8(0101111, 7)},
}

Definition at line 61 of file interface.c.

Referenced by tap_use_new_tms_table().

◆ short_tms_seqs

const struct tms_sequences short_tms_seqs[6][6]

static

Initial value:

= { 
    
 
 
 
{B8(1111111, 7), B8(0000000, 7), B8(0010111, 7), B8(0001010, 7), B8(0011011, 7), B8(0010110, 7)}, 
{B8(1111111, 7), B8(0000000, 7), B8(001, 3),     B8(0101, 4),    B8(0011, 4),    B8(01011, 5)}, 
{B8(1111111, 7), B8(011, 3),     B8(00111, 5),   B8(01, 2),      B8(001111, 6),  B8(0101111, 7)}, 
{B8(1111111, 7), B8(011, 3),     B8(01, 2),      B8(0, 1),       B8(001111, 6),  B8(0101111, 7)}, 
{B8(1111111, 7), B8(011, 3),     B8(00111, 5),   B8(010111, 6),  B8(001111, 6),  B8(01, 2)}, 
{B8(1111111, 7), B8(011, 3),     B8(00111, 5),   B8(010111, 6),  B8(01, 2),      B8(0, 1)} 
}

Definition at line 61 of file interface.c.

Referenced by tap_use_new_tms_table(), and tap_uses_new_tms_table().

◆ state_follower

tap_state_t state_follower = TAP_RESET

static

See also: tap_set_state() and tap_get_state() accessors. Actual name is not important since accessors hide it.

Definition at line 29 of file interface.c.

Referenced by tap_get_state(), and tap_set_state_impl().

◆ tap_name_mapping

const struct name_mapping tap_name_mapping[]

static

Initial value:

= {
    { TAP_RESET, "RESET", },
    { TAP_IDLE, "RUN/IDLE", },
    { TAP_DRSELECT, "DRSELECT", },
    { TAP_DRCAPTURE, "DRCAPTURE", },
    { TAP_DRSHIFT, "DRSHIFT", },
    { TAP_DREXIT1, "DREXIT1", },
    { TAP_DRPAUSE, "DRPAUSE", },
    { TAP_DREXIT2, "DREXIT2", },
    { TAP_DRUPDATE, "DRUPDATE", },
    { TAP_IRSELECT, "IRSELECT", },
    { TAP_IRCAPTURE, "IRCAPTURE", },
    { TAP_IRSHIFT, "IRSHIFT", },
    { TAP_IREXIT1, "IREXIT1", },
    { TAP_IRPAUSE, "IRPAUSE", },
    { TAP_IREXIT2, "IREXIT2", },
    { TAP_IRUPDATE, "IRUPDATE", },
 
    
    { TAP_IDLE, "IDLE", },
}

Referenced by tap_state_by_name(), and tap_state_name().

◆ tms_seqs

tms_table* tms_seqs = &short_tms_seqs

static

Definition at line 188 of file interface.c.

Referenced by tap_get_tms_path(), tap_get_tms_path_len(), tap_use_new_tms_table(), and tap_uses_new_tms_table().

Data Structures

Macros

Typedefs

Functions

Variables

Macro Definition Documentation

◆ B8

◆ B8__

◆ HEX__

◆ JTAG_DEBUG_STATE_APPEND

◆ JTAG_DEBUG_STATE_PRINT

Typedef Documentation

◆ tms_table

Function Documentation

◆ jtag_debug_state_machine_()

◆ tap_get_end_state()

◆ tap_get_state()

◆ tap_get_tms_path()

◆ tap_get_tms_path_len()

◆ tap_is_state_stable()

◆ tap_move_ndx()

◆ tap_set_end_state()

◆ tap_set_state_impl()

◆ tap_state_by_name()

◆ tap_state_name()

◆ tap_state_transition()

◆ tap_use_new_tms_table()

◆ tap_uses_new_tms_table()

Variable Documentation

◆ end_state_follower

◆ old_tms_seqs

◆ short_tms_seqs

◆ state_follower

◆ tap_name_mapping

◆ tms_seqs